home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Giga Pack
/
Giga Pack CD1.iso
/
adv
/
wall
/
sound.txt
< prev
next >
Wrap
Text File
|
1993-11-01
|
2KB
|
36 lines
=============================================================================
SOUNDCARD HELP
The SETD program must be run to choose a sound card option for
"Walls of Rome". The WALLS batch file will run this program automatically
the first time you start "Walls of Rome" and allow you to choose before
loading the game.
Common sound cards are listed, if you do not see your card and it
is either Adlib or Sound Blaster compatible then choose the appropriate
match.
Sound drivers are automatically configured to the default values
for the appropriate card, if you are not using the default or have
selected a Sound Blaster compatible which uses setting different than
the Sound Blaster defaults you will need to configure to your specific
settings. The I/O port setting defaults will appear, choose the
appropriate port by entering the value, then IRQ default will appear
and you can type in that value.
If sound problems occur with one of the sound cards listed, please
check your sound card documentation and be sure it is correctly set up
before contacting us, run sound board test software when possible to
determine you have chosen the correct settings. If problems occur with
a card not listed but that should be 100% compatible to one listed, try
choosing the PC Speaker options to see if they work and problem may be
due to a board that is not as compatible as it suggests.
The sound drivers require XMS memory to load, please be sure you
have at least 2 MB of XMS memory free to load sound drivers and sound
effects. Please consult the "Troubleshooting" section of your
Walls of Rome manual for help on freeing up memory or use this HELP
program and select either memory help or the boot disk maker.
=============================================================================
- END OF FILE -